2aa Propolymer Haz-Lo-Streamlight

2aa Propolymer Haz-Lo

  • Clam
  • Black
  • One Size
    • - +

      Please note this may ship at a later date without the rest of your order


        SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.

        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
        • Combination of visual and mechanical polarity protection ensures correct installation of batteries
        • Light designed to not power on if batteries are installed incorrectly
        • 3 "AA" alkaline batteries reduce battery and recycling costs by 25%
        • C4® LEDtechnology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours
        • Sealed switch design protects it from corrosion caused by battery leakage
        • One body electronic LED module mechanically attached to electronic assembly
        • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
        • Regulated run time provides consistent performance throughout battery life
        • O-ring sealed, dust-proof, water-tight enclosure
        • IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
        • 3 meter impact resistance tested
        • Ergonomically designed for maximum hand comfort
        • 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
        • Limited Lifetime Warranty
        • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135 C.
        • Assembled in the USA
        • RoHS compliant

        Currently Viewing